Software setup (2nd PC)

This page explains how to install the necessary drivers and software needed for your DMA Card.

1.) Boot into your second PC, with your DMA Cable plugged into the data port of the DMA Card

2.) Launch device manager and check for the 'FTDI' Device (see image below)

image showing driver installed + not installed driver

3.) If you can see it successfully with no yellow triangle, you can skip the following steps

4.) Download this tool (here) and extract the folder onto an accessible folder

5.) Right-Click on the FTDI Device in Device Manager -> Click Update Driver -> Click Browse my computer for drivers -> Click ‘Browse’ -> Navigate to the unzipped folder and hit OK -> Hit Next, the driver should install now