Fuser Setup
This page explains how to setup your fuser.
Step 1: Initial Setup
Disconnect all displays except for the main monitor.
Connect the main monitor to the Fuser (not directly to the GPU).
Ensure all HDMI cables connected to the Fuser are HDMI 2.0
Step 2: Configure Display Settings
On Both PCs:
Right-click on an empty area of the desktop.
Select Display Settings.
Scroll down to the Multiple displays section and select Extend these displays.
On the 2nd PC:
Go to Start > Settings > Personalization > Background/Wallpaper.
Under Personalize your background, select Solid Color and choose Black.
Example: https://i.imgur.com/wnn9no6.png
Step 3: Reconnect Cables to the Fuser
Ensure all three HDMI 2.0 cables are connected to the Fuser.
Make sure the monitor is no longer directly connected to the GPU
Troubleshooting
Desktop Apps Are Merged / Two Search Bars Visible
Press K2 (Main Screen Mode) when no overlay is active.
Second Monitor Shows 'No Signal'
Ensure the 2nd monitor is turned on
The 2nd monitor should be connected to its respective PC, not the Fuser.
Refresh Rate Issues (Limited to 60Hz or 90Hz)
This indicates not all HDMI cables are HDMI 2.0
Use three HDMI 2.0 cables for the Fuser setup
Important Notes
The Fuser requires 3 HDMI 2.0 cables for full functionality.
Once set up correctly, switching modes (K1/K2/K3) will allow seamless integration between both PCs
Last updated